C
ONFIGURING THE
Parameter
Multiple Collision
Frames
Carrier Sense Errors
SQE Test Errors
Frames Too Long
Deferred Transmissions A count of frames for which the first transmission
Internal MAC Receive
Errors
RMON Statistics
Drop Events
Jabbers
Received Bytes
Collisions
Received Frames
Broadcast Frames
3-118
S
WITCH
Table 3-9 Port Statistics (Continued)
Description
A count of successfully transmitted frames for which
transmission is inhibited by more than one collision.
The number of times that the carrier sense condition
was lost or never asserted when attempting to transmit
a frame.
A count of times that the SQE TEST ERROR message
is generated by the PLS sublayer for a particular
interface.
A count of frames received on a particular interface that
exceed the maximum permitted frame size.
attempt on a particular interface is delayed because the
medium was busy.
A count of frames for which reception on a particular
interface fails due to an internal MAC sublayer receive
error.
The total number of events in which packets were
dropped due to lack of resources.
The total number of frames received that were longer
than 1518 octets (excluding framing bits, but including
FCS octets), and had either an FCS or alignment error.
Total number of bytes of data received on the network.
This statistic can be used as a reasonable indication of
Ethernet utilization.
The best estimate of the total number of collisions on
this Ethernet segment.
The total number of frames (bad, broadcast and
multicast) received.
The total number of good frames received that were
directed to the broadcast address. Note that this does
not include multicast packets.
Need help?
Do you have a question about the SMC TigerStack IV SMC6224M and is the answer not in the manual?
Questions and answers