Disable; Configure - SMC Networks SMC TigerStack IV SMC6224M Management Manual

C L
OMMAND INE

disable

This command returns to Normal Exec mode from privileged mode. In
normal access mode, you can only display basic information on the
switch's configuration or Ethernet statistics. To gain access to all
commands, you must use the privileged mode. See "Understanding
Command Modes" on page 4-8.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
The ">" character is appended to the end of the prompt to indicate
that the system is in normal access mode.
Example
Console#disable
Console>
Related Commands
enable (4-27)

configure

This command activates Global Configuration mode. You must enter this
mode to modify any settings on the switch. You must also enter Global
Configuration mode prior to enabling some of the other configuration
modes, including Interface Configuration, Line Configuration, and VLAN
Database Configuration. See "Understanding Command Modes" on
page 4-8.
Default Setting
None
Command Mode
Privileged Exec
4-28
I
NTERFACE