Web – Click IGMP Snooping, IGMP Member Port Table. Specify the
interface attached to a multicast service (via an IGMP-enabled switch or
multicast router), indicate the VLAN that will propagate the multicast
service, specify the multicast IP address, and click Add. After you have
completed adding ports to the member list, click Apply.
Figure 3-86 IGMP Member Port Table
CLI – This example assigns a multicast address to VLAN 1, and then
displays all the known multicast services supported on VLAN 1.
Console(config)#ip igmp snooping vlan 1 static 224.1.1.12
ethernet 1/12
Console(config)#exit
Console#show mac-address-table multicast vlan 1
VLAN M'cast IP addr. Member ports Type
---- --------------- ------------ -------
1
224.1.1.12
1
224.1.2.3
Console#
Eth1/12
USER
Eth1/12
IGMP
M
F
ULTICAST
ILTERING
4-237
4-239
3-193
Need help?
Do you have a question about the SMC TigerStack IV SMC6224M and is the answer not in the manual?
Questions and answers