Default Setting; Table 4-19 Show Logging Flash/Ram - Display Description - SMC Networks SMC TigerStack IV SMC6224M Management Manual

C L
OMMAND INE

Default Setting

None
Command Mode
Privileged Exec
Example
The following example shows that system logging is enabled, the message
level for flash memory is "errors" (i.e., default level 3 - 0), the message
level for RAM is "informational" (i.e., default level 6 - 0).
Console#show logging flash
Syslog logging:
History logging in FLASH: level errors
Console#show logging ram
Syslog logging:
History logging in RAM: level informational
Console#

Table 4-19 show logging flash/ram - display description

Field
Syslog logging
History logging in
FLASH
History logging in
RAM
The following example displays settings for the trap function.
Console#show logging trap
Syslog logging:
REMOTELOG status:
REMOTELOG facility type:
REMOTELOG level type:
REMOTELOG server IP address: 1.2.3.4
REMOTELOG server IP address: 0.0.0.0
REMOTELOG server IP address: 0.0.0.0
REMOTELOG server IP address: 0.0.0.0
REMOTELOG server IP address: 0.0.0.0
Console#
4-64
I
NTERFACE
Description
Shows if system logging has been enabled via the logging on
command.
The message level(s) reported based on the logging history
command.
The message level(s) reported based on the logging history
command.
Enabled
Enabled
Enabled
Enabled
local use 7
Debugging messages