Rate Limit Configuration; Figure 3-50 Rate Limit Granularity Configuration - SMC Networks SMC TigerStack IV SMC6224M Management Manual

C
ONFIGURING THE
Web – Click Port, Rate Limit, Granularity. Select the required rate limit
granularity for Fast Ethernet and Gigabit Ethernet, and click apply.
CLI - This example sets and displays Fast Ethernet and Gigabit Ethernet
granularity.
Console(config)#rate-limit fastethernet granularity 512
Console(config)#rate-limit gigabitethernet granularity 33300 4-160
console#show rate-limit
Fast ethernet granularity:
Gigabit ethernet granularity:
Console#

Rate Limit Configuration

Use the rate limit configuration pages to apply rate limiting.
Command Usage
Input and output rate limit can be enabled or disabled for individual
interfaces.
Command Attributes
• Port/Trunk – Displays the port number.
• Rate Limit Status – Enables or disables the rate limit. (Default:
Disabled)
• Rate Limit Level – Sets the rate limit level.
(Fast Ethernet – Range: 1-255: Default: 255;
Gigabit Ethernet – Range: 1-30: Default: 30)
Note: Actual rate limit = Rate Limit Level * Granularity
3-114
S
WITCH

Figure 3-50 Rate Limit Granularity Configuration

512
33300
4-160
4-161