Partial Keyword Lookup; Negating The Effect Of Commands; Using Command History - SMC Networks SMC TigerStack IV SMC6224M Management Manual

The command "show interfaces ?" will display the following information:
Console#show interfaces ?
counters
status
switchport
Console#

Partial Keyword Lookup

If you terminate a partial keyword with a question mark, alternatives that
match the initial letters are provided. (Remember not to leave a space
between the command and question mark.) For example "s?" shows all the
keywords starting with "s."
Console#show s?
snmp
system
Console#show s

Negating the Effect of Commands

For many configuration commands you can enter the prefix keyword "no"
to cancel the effect of a command or reset the configuration to the default
value. For example, the logging command will log system messages to a
host server. To disable logging, specify the no logging command. This
guide describes the negation effect for all applicable commands.

Using Command History

The CLI maintains a history of commands that have been entered. You
can scroll back through the history of commands by pressing the up arrow
key. Any command displayed in the history list can be executed again, or
first modified and then executed.
Using the show history command displays a longer list of recently
executed commands.
Interface counters information
Interface status information
Interface switchport information
sntp spanning-tree
E
NTERING
ssh startup-config
C
OMMANDS
4-7