Mac-Address-Table Aging-Time; Show Mac-Address-Table Aging-Time - SMC Networks SMC TigerStack IV SMC6224M Management Manual

mac-address-table aging-time

This command sets the aging time for entries in the address table. Use the
no form to restore the default aging time.
Syntax
mac-address-table aging-time seconds
no mac-address-table aging-time
seconds - Aging time. (Range: 10-1000000 seconds;
0 to disable aging)
Default Setting
300 seconds
Command Mode
Global Configuration
Command Usage
The aging time is used to age out dynamically learned forwarding
information.
Example
Console(config)#mac-address-table aging-time 100
Console(config)#

show mac-address-table aging-time

This command shows the aging time for entries in the address table.
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show mac-address-table aging-time
Aging time: 100 sec.
Console#
A T
DDRESS ABLE
C
OMMANDS
4-179