SMC Networks SMC TigerStack IV SMC6224M Management Manual page 261

Table 4-4 Command Groups (Continued)
Command Group Description
Address Table
Spanning Tree
VLANs
GVRP and
Bridge Extension
Priority
Multicast Filtering
IP Interface
The access mode shown in the following tables is indicated by these
abbreviations:
NE (Normal Exec)
PE (Privileged Exec)
GC (Global Configuration)
ACL (Access Control List Configuration)
IC (Interface Configuration)
LC (Line Configuration)
VC (VLAN Database Configuration)
Configures the address table for filtering specified
addresses, displays current entries, clears the table, or
sets the aging time
Configures Spanning Tree settings for the switch
Configures VLAN settings, and defines port
membership for VLAN groups; also enables or
configures private VLANs
Configures GVRP settings that permit automatic
VLAN learning; shows the configuration for the
bridge extension MIB
Sets port priority for untagged frames, selects strict
priority or weighted round robin, relative weight for
each priority queue, also sets priority for TCP/UDP
traffic types, IP precedence, and DSCP
Configures IGMP multicast filtering, query
parameters, and specifies ports attached to a
multicast router
Configures IP address for the switch
C G
OMMAND ROUPS
Page
4-175
4-180
4-195
4-215
4-220
4-236
4-247
4-13