Figure 3-95 Globally Enabling The Ip Port Priority Status; Figure 3-96 Mapping Ports And Trunks To Ip Tcp/Udp Priority - SMC Networks SMC TigerStack III SMC6824M Management Manual

C
ONFIGURING THE
Web – Click Priority, IP Port Status. Set IP Port Priority Status to Enabled.

Figure 3-95 Globally Enabling the IP Port Priority Status

22
Web – Click Priority, IP Port Priority. Select a port or trunk from the
Interface field. Enter the port number for a network application in the IP
Port Number box and the new CoS value in the Class of Service box, and
then click Apply.

Figure 3-96 Mapping Ports and Trunks to IP TCP/UDP Priority

22. Mapping specific values for IP Port Priority is implemented as an interface configuration command,
but any changes will apply to the all interfaces on the switch.
3-214
S
WITCH