Figure 3-48 Configuring An Acl Mac Mask - SMC Networks SMC TigerStack III SMC6824M Management Manual

A C L
CCESS ONTROL ISTS
Web – Configure the mask to match the required rules in the MAC ingress
or egress ACLs. Set the mask to check for any source or destination
address, a host address, or an address range. Use a bitmask to search for
specific VLAN ID(s) or Ethernet type(s). Or check for rules where a
packet format was specified. Then click Add.

Figure 3-48 Configuring an ACL MAC Mask

3-111