Show Snmp Engine-Id - SMC Networks SMC TigerStack III SMC6824M Management Manual

the engine ID of the authoritative agent. For informs, the authoritative
SNMP agent is the remote agent. You therefore need to configure the
remote agent's SNMP engine ID before you can send proxy requests or
informs to it.
• Trailing zeroes need not be entered to uniquely specify a engine ID. In
other words, the value "1234" is equivalent to "1234" followed by 22
zeroes.
• A local engine ID is automatically generated that is unique to the switch.
This is referred to as the default engine ID. If the local engineID is
deleted or changed, all SNMP users will be cleared. You will need to
reconfigure all existing users (page 4-167).
Example
Console(config)#snmp-server engineID local 12345
Console(config)#snmp-server engineID remote 54321 192.168.1.19
Console(config)#
Related Commands
snmp-server host (4-156)

show snmp engine-id

This command shows the SNMP engine ID.
Command Mode
Privileged Exec
Example
This example shows the default engine ID.
Console#show snmp engine-id
Local SNMP engineID: 8000002a8000000000e8666672
Local SNMP engineBoots: 1
Remote SNMP engineID
80000000030004e2b316c54321
Console#
C L
OMMAND INE
I
NTERFACE
IP address
192.168.1.19
4-161