SMC Networks SMC TigerStack III SMC6824M Management Manual page 232

C
ONFIGURING THE
CLI – This displays STA settings for instance 0, followed by settings for
each port. The settings for instance 0 are global settings that apply to the
IST (page 3-156), the settings for other instances only apply to the local
spanning tree.
Console#show spanning-tree mst 0
Spanning-tree information
---------------------------------------------------------------
Spanning tree mode:
Spanning tree enabled/disabled:
Spanning tree backup root:
Instance:
VLANs configuration:
Priority:
Bridge Hello Time (sec.):
Bridge Max Age (sec.):
Bridge Forward Delay (sec.):
Root Hello Time (sec.):
Root Max Age (sec.):
Root Forward Delay (sec.):
Max hops:
Remaining hops:
Designated Root:
Current root port:
Current root cost:
CIST path cost:
Number of topology changes:
Last topology changes time (sec.):303
Transmission limit:
Path Cost Method:
---------------------------------------------------------------
Eth 1/ 1 information
---------------------------------------------------------------
Admin status:
Role:
State:
External path cost:
Internal path cost:
Priority:
Designated cost:
Designated port
Designated root:
Designated bridge:
Fast forwarding:
Forward transitions:
Admin edge port:
Oper edge port:
Admin Link type:
Oper Link type:
Spanning Tree Status:
. .
.
3-176
S
WITCH
enabled
root
forwarding
200000
200000
128
0
: 128.10
32768.0.0000E8AAAA00
32768.0.0000E8AAAA00
disabled
1
enabled
disabled
auto
point-to-point
enabled
MSTP
enabled
disabled
0
2-4093
32768
2
20
15
2
20
15
20
20
32768.0.0000E8AAAA00
1
10000
0
12
3
long
4-227