Figure 3-93 Mapping Ip Precedence To Class Of Service Values - SMC Networks SMC TigerStack III SMC6824M Management Manual

C
ONFIGURING THE
Command Attributes
• IP Precedence Priority Table – Shows the IP Precedence to CoS map.
• Class of Service Value – Maps a CoS value to the selected IP
Precedence value. Note that "0" represents low priority and "7"
represent high priority.
Note: IP Precedence settings apply to all interfaces.
20
Web – Click Priority, IP Precedence Priority. Select a port or trunk from
the Interface field. Select an entry from the IP Precedence Priority Table,
enter a value in the Class of Service Value field, and then click Apply.

Figure 3-93 Mapping IP Precedence to Class of Service Values

CLI – The following example globally enables IP Precedence service on
20
the switch, maps IP Precedence value 1 to CoS value 0 on port 5, and then
displays all the IP Precedence settings.
Console(config)#map ip precedence
Console(config)#interface ethernet 1/5
Console(config-if)#map ip precedence 1 cos 0
Console(config-if)#end
20. Mapping specific values for IP Precedence is implemented as an interface configuration command, but
any changes will apply to the all interfaces on the switch.
3-210
S
WITCH
4-262
4-263