Ip Acls; Table 4-36 Ip Acl Commands - SMC Networks SMC TigerStack III SMC6824M Management Manual

A C
CCESS ONTROL

IP ACLs

Command
access-list ip
access-list ip
extended
fragment-auto-mask
permit, deny
permit, deny
show ip access-list
access-list ip
mask-precedence
mask
show access-list ip
mask-precedence
ip access-group
show ip access-group Shows port assignments for IP ACLs
map access-list ip
show map
access-list ip
match access-list ip
show marking
4-122
L C
IST OMMANDS

Table 4-36 IP ACL Commands

Function
Creates an IP ACL and enters
configuration mode
Automatically creates extra masks to
support fragmented ACL entries
Filters packets matching a specified source
IP address
Filters packets meeting the specified
criteria, including source and destination IP
address, TCP/UDP port number, protocol
type, and TCP control code
Displays the rules for configured IP ACLs PE
Changes to the mode for configuring access
control masks
Sets a precedence mask for the ACL rules IP-Mask 4-130
Shows the ingress or egress rule masks for
IP ACLs
Adds a port to an IP ACL
Sets the CoS value and corresponding
output queue for packets matching an ACL
rule
Shows CoS value mapped to an access list
for an interface
Changes the 802.1p priority, IP
Precedence, or DSCP Priority of a frame
matching the defined rule (i.e., also called
packet marking)
Displays the current configuration for
packet marking
Mode Page
GC 4-123
GC 4-123
STD-A 4-124
CL
EXT-A 4-125
CL
4-128
GC 4-129
PE 4-133
IC 4-134
PE 4-134
IC 4-135
PE 4-136
IC 4-137
PE 4-138