Ip Igmp Snooping Query-Interval - SMC Networks SMC TigerStack III SMC6824M Management Manual

query-max- response-time. If the countdown finishes, and the client
still has not responded, then that client is considered to have left the
multicast group.
Example
The following shows how to configure the query count to 10:
Console(config)#ip igmp snooping query-count 10
Console(config)#
Related Commands
ip igmp snooping query-max-response-time (4-276)

ip igmp snooping query-interval

This command configures the query interval. Use the no form to restore the
default.
Syntax
ip igmp snooping query-interval seconds
no ip igmp snooping query-interval
seconds - The frequency at which the switch sends IGMP host-query
messages. (Range: 60-125)
Default Setting
125 seconds
Command Mode
Global Configuration
Example
The following shows how to configure the query interval to 100 seconds:
Console(config)#ip igmp snooping query-interval 100
Console(config)#
C L
OMMAND INE
I
NTERFACE
4-275