Vlan Commands; Editing Vlan Groups; Vlan Database; Table 4-57 Vlan Commands - SMC Networks SMC TigerStack III SMC6824M Management Manual

VLAN C
OMMANDS

VLAN Commands

A VLAN is a group of ports that can be located anywhere in the network,
but communicate as though they belong to the same physical segment. This
section describes commands used to create VLAN groups, add port
members, specify how VLAN tagging is used, and enable automatic VLAN
registration for the selected interface.
Command Groups
Editing VLAN Groups Sets up VLAN groups, including name, VID and
Configuring VLAN
Interfaces
Displaying VLAN
Information
Configuring Private
VLANs

Editing VLAN Groups

Command

vlan database

vlan
vlan database
This command enters VLAN database mode. All commands in this mode
will take effect immediately.
Default Setting
None
4-230

Table 4-57 VLAN Commands

Function
state
Configures VLAN interface parameters, including
ingress and egress tagging mode, ingress filtering,
PVID, and GVRP
Displays VLAN groups, status, port members, and
MAC addresses
Configures private VLANs, port mode, and
primary/secondary associations

Table 4-58 Editing VLAN Groups

Function
Enters VLAN database mode to add,
change, and delete VLANs
Configures a VLAN, including VID, name
and state
Page
4-230
4-232
4-240
4-241
Mode Page
GC 4-230
VC 4-231