Show Snmp Group - SMC Networks SMC TigerStack III SMC6824M Management Manual

Command Usage
• A group sets the access policy for the assigned users.
• When authentication is selected, the MD5 or SHA algorithm is used as
specified in the snmp-server user command.
• When privacy is selected, the DES 56-bit algorithm is used for data
encryption
• For additional information on the notification messages supported by
this switch, see "Supported Notification Messages" on page 3-62. Also,
note that the authentication, link-up and link-down messages are legacy
traps and must therefore be enabled in conjunction with the
snmp-server enable traps command (page 4-159).
Example
Console(config)#snmp-server group r&d v3 auth write daily
Console(config)#

show snmp group

Four default groups are provided – SNMPv1 read-only access and read/write
access, and SNMPv2c read-only access and read/write access.
Command Mode
Privileged Exec
Example
Console#show snmp group
Group Name: r&d
Security Model: v3
Read View: defaultview
Write View: daily
Notify View: none
Storage Type: nonvolatile
Row Status: active
Group Name: public
Security Model: v1
Read View: defaultview
Write View: none
Notify View: none
Storage Type: volatile
Row Status: active
C L
OMMAND INE
I
NTERFACE
4-165