Mapping Ip Port Priority; Figure 3-79. Enabling Ip Port Priority Status; Figure 3-80. Mapping Ip Port Priority To Interfaces - SMC Networks 100BASE-TX Management Manual

3
Configuring the Switch

Mapping IP Port Priority

You can also map network applications to Class of Service values based on the IP
port number (i.e., TCP/UDP port number) in the frame header. Some of the more
common TCP service ports include: HTTP: 80, FTP: 21, Telnet: 23 and POP3: 110.
Command Attributes
• IP Port Priority Status – Enables or disables the IP port priority.
• Interface – Selects the port or trunk interface to which the settings apply.
• IP Port Priority Table – Shows the IP port to CoS map.
• IP Port Number (TCP/UDP) – Set a new IP port number.
• Class of Service Value – Sets a CoS value for a new IP port. Note that "0"
represents low priority and "7" represent high priority.
Note:
IP Port Priority settings apply to all interfaces.
Web – Click Priority, IP Port Priority Status. Set IP Port Priority Status to Enabled.

Figure 3-79. Enabling IP Port Priority Status

Web* – Click Priority, IP Port Priority. Select a port or trunk from the Interface field.
Enter the port number for a network application in the IP Port Number box and the
new CoS value in the Class of Service box, and then click Add IP Port.

Figure 3-80. Mapping IP Port Priority to Interfaces

3-130