Dns Commands - SMC Networks SMC TigerStack III SMC6824M Management Manual

DNS C
OMMANDS

DNS Commands

These commands are used to configure Domain Naming System (DNS)
services. You can manually configure entries in the DNS domain name to IP
address mapping table, configure default domain names, or specify one or
more name servers to use for domain name to address translation.
Note that domain name services will not be enabled until at least one name
server is specified with the ip name-server command and domain lookup is
enabled with the ip domain-lookup command.
Command
ip host
clear host
ip domain-name
ip domain-list
ip name-server
ip domain-lookup
show hosts
show dns
show dns cache
clear dns cache
4-286
Table 4-74 DNS Commands
Function
Creates a static host name-to-address mapping GC
Deletes entries from the host name-to-address
table
Defines a default domain name for incomplete
host names
Defines a list of default domain names for
incomplete host names
Specifies the address of one or more name
servers to use for host name-to-address
translation
Enables DNS-based host name-to-address
translation
Displays the static host name-to-address
mapping table
Displays the configuration for DNS services
Displays entries in the DNS cache
Clears all entries from the DNS cache
Mode Page
4-287
PE 4-288
GC 4-288
GC 4-289
GC 4-290
GC 4-291
PE 4-292
PE 4-293
PE 4-293
PE 4-294