SMC Networks SMC TigerStack III SMC6824M Management Manual page 121

Table 3-5 Supported Notification Messages (Continued)
Object Label
swIpFilterRejectTrap 1.3.6.1.4.1.202.20.28.63.2.1.0.40
swSmtpConnFailure
Trap
pethPsePortOnOff
Notification
pethPsePortPower
MaintenanceStatus
Notification
pethMainPower
UsageOnNotification
pethMainPower
UsageOffNotification
* These are legacy notifications and therefore must be enabled in conjunction with the
corresponding traps on the SNMP Configuration menu (page 3-52).
S N
IMPLE ETWORK
Object ID
1.3.6.1.4.1.202.20.41.63.2.1.0.40
1.3.6.1.4.1.202.20.53.63.2.1.0.40
1.3.6.1.4.1.202.20.28.63.2.1.0.41
1.3.6.1.4.1.202.20.41.63.2.1.0.41
1.3.6.1.4.1.202.20.53.63.2.1.0.41
1.3.6.1.4.1.202.20.41.63.2.1.0.43
1.3.6.1.4.1.202.20.53.63.2.1.0.43
1.3.6.1.4.1.202.20.41.63.2.1.0.44
1.3.6.1.4.1.202.20.53.63.2.1.0.44
1.3.6.1.4.1.202.20.41.63.2.1.0.45
1.3.6.1.4.1.202.20.53.63.2.1.0.45
1.3.6.1.4.1.202.20.41.63.2.1.0.46
1.3.6.1.4.1.202.20.53.63.2.1.0.46
M
ANAGEMENT
Description
This trap is sent when an
incorrect IP address is
rejected by the IP Filter.
This trap is triggered if
the SMTP system cannot
open a connection to the
mail server successfully.
This notification
indicates if a PSE (Power
Sourcing Equipment)
Port is delivering power
to the PD (Powered
Device). This notification
is sent on every status
change except in search
mode.
This notification
indicates a Port Change
Status and is sent on
every status change.
This notification
indicates PSE Threshold
usage indication is on;
the power usage is above
the threshold.
This notification
indicates that the PSE
Threshold usage
indication is off; the
usage power is below the
threshold.
P
ROTOCOL
3-65