Show Ip Igmp Snooping; Show Mac-Address-Table Multicast - SMC Networks SMC TigerStack III SMC6824M Management Manual

M F
ULTICAST ILTERING

show ip igmp snooping

This command shows the IGMP snooping configuration.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
See "Configuring IGMP Snooping and Query Parameters" on page 3-222
for a description of the displayed items.
Example
The following shows the current IGMP snooping configuration:
Console#show ip igmp snooping
Service status:
Querier status:
Query count:
Query interval:
Query max response time: 10 sec
Router port expire time: 300 sec
IGMP snooping version:
Console#

show mac-address-table multicast

This command shows known multicast addresses.
Syntax
show mac-address-table multicast [vlan vlan-id]
[user | igmp-snooping]
• vlan-id - VLAN ID (1 to 4093)
• user - Display only the user-configured multicast entries.
• igmp-snooping - Display only entries learned through IGMP
snooping.
Default Setting
None
4-272
C
OMMANDS
Enabled
Enabled
2
125 sec
Version 2