C
ONFIGURING THE
Command Attributes
• System Log Status – Enables/disables the logging of debug or error
messages to the logging process.
• Flash Level – Limits log messages saved to the switch's permanent flash
memory for all levels up to the specified level. For example, if level 3 is
specified, all messages from level 0 to level 3 will be logged to flash.
(Range: 0-7, Default: 3).
Level
7
6
5
4
3
2
1
0
* There are only Level 2, 5 and 6 error messages for the current firmware release.
• RAM Level – Limits log messages saved to the switch's temporary RAM
memory for all levels up to the specified level. For example, if level 7 is
specified, all messages from level 0 to level 7 will be logged to RAM.
(Range: 0-7, Default: 6)
The switch allows you to specify which levels are logged to RAM or flash
memory.
Note:The Flash Level must be equal to or less than the RAM Level.
3-36
S
WITCH
Table 3-3 Logging Levels
Severity Name
Debug
Informational
Notice
Warning
Error
Critical
Alert
Emergency
Description
Debugging messages
Informational messages only
Normal but significant condition, such as cold
start
Warning conditions (e.g., return false, unexpected
return)
Error conditions (e.g., invalid input, default used)
Critical conditions (e.g., memory allocation, or
free memory error - resource exhausted)
Immediate action needed
System unusable