Show System - SMC Networks SMC TigerStack III SMC6824M Management Manual

show system

This command displays system information.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
• For a description of the items shown by this command, refer to
"Displaying System Information" on page 3-13.
• The POST results should all display "PASS." If any POST test indicates
"FAIL," contact your distributor for assistance.
Example
Console#show system
System description: TigerStack III 10/100 -
6824M Managed 24+2 Stackable Switch;
SW version: V2.4.2.13
System OID string: 1.3.6.1.4.1.202.20.28
System information
System Up time:
seconds
System Name:
System Location:
System Contact:
MAC address:
Web server:
Web server port:
Web secure server:
Web secure server port:
Telnet server:
Telnet server port:
Authentication login:
Authentication enabled:
POST result
Uart Loopback Test ........... PASS
DRAM Test .................... PASS
Timer Test ................... PASS
PCI Device Test .............. PASS
Switch Int Loopback test ..... PASS
Done All Pass.
Console#
0 days, 0 hours, 1 minutes, and 25.59
[NONE]
[NONE]
[NONE]
00-04-E2-B3-16-C0
enabled
80
enabled
443
enable
23
local
local
C L
OMMAND INE
I
NTERFACE
4-79