Changing The Aging Time; Spanning Tree Algorithm Configuration; Figure 3-68 Setting The Aging Time - SMC Networks SMC TigerStack III SMC6824M Management Manual

C
ONFIGURING THE

Changing the Aging Time

You can change the aging time for entries in the dynamic address table.
Command Attributes
• Aging Status – Enables or disables the aging time.
• Aging Time – The time after which a learned entry is discarded.
(Range: 10-1000000 seconds; Default: 300 seconds)
Web – Click Address Table, Address Aging. Specify the new aging time,
click Apply.
CLI – This example sets the aging time to 300 seconds.
Console(config)#mac-address-table aging-time 300
Console(config)#

Spanning Tree Algorithm Configuration

The Spanning Tree Algorithm (STA) can be used to detect and disable
network loops, and to provide backup links between switches, bridges or
routers. This allows the switch to interact with other bridging devices (that
is, an STA-compliant switch, bridge or router) in your network to ensure
that only one route exists between any two stations on the network, and
provide backup links which automatically take over when a primary link
goes down.
3-154
S
WITCH

Figure 3-68 Setting the Aging Time

4-203