Multicast Filtering Commands
This switch uses IGMP (Internet Group Management Protocol) to query for
any attached hosts that want to receive a specific multicast service. It
identifies the ports containing hosts requesting a service and sends data out
to those ports only. It then propagates the service request up to any
neighboring multicast switch/router to ensure that it will continue to receive
the multicast service.
Command Groups
IGMP Snooping
IGMP Query
Static Multicast
Routing
IGMP Snooping Commands
Command
ip igmp snooping
ip igmp snooping vlan
static
ip igmp snooping
version
show ip igmp snooping Shows the IGMP snooping and query
show
mac-address-table
multicast
Table 4-69 Multicast Filtering Commands
Function
Configures multicast groups via IGMP snooping or
static assignment, sets the IGMP version, displays
current snooping and query settings, and displays the
multicast service and group members
Configures IGMP query parameters for multicast
filtering at Layer 2
Configures static multicast router ports
Table 4-70 IGMP Snooping Commands
Function
Enables IGMP snooping
Adds an interface as a member of a multicast
group
Configures the IGMP version for snooping GC
configuration
Shows the IGMP snooping MAC multicast
list
C
L
OMMAND
INE
I
NTERFACE
Page
4-269
4-273
4-278
Mode Page
GC
4-270
GC
4-270
4-271
PE
4-272
PE
4-272
4-269