Figure 3-44 Configuring Extended Ip Acls - SMC Networks SMC TigerStack III SMC6824M Management Manual

A C L
CCESS ONTROL ISTS
Web – Specify the action (i.e., Permit or Deny). Specify the source and/or
destination addresses. Select the address type (Any, Host, or IP). If you
select "Host," enter a specific address. If you select "IP," enter a subnet
address and the mask for an address range. Set any other required criteria,
such as service type, protocol type, or TCP control code. Then click Add.

Figure 3-44 Configuring Extended IP ACLs

3-103