Interface Vlan - SMC Networks SMC TigerStack III SMC6824M Management Manual

Command
switchport forbidden
vlan
switchport priority
default

interface vlan

This command enters interface configuration mode for VLANs, which is
used to configure VLAN parameters for a physical interface.
Syntax
interface vlan vlan-id
vlan-id - ID of the configured VLAN. (Range: 1-4093, no leading
zeroes)
Default Setting
None
Command Mode
Global Configuration
Example
The following example shows how to set the interface configuration mode to
VLAN 1, and then assign an IP address to the VLAN:
Console(config)#interface vlan 1
Console(config-if)#ip address 192.168.1.254 255.255.255.0
Console(config-if)#
Related Commands
shutdown (4-176)
Table 4-59 Configuring VLAN Interfaces
Function
Configures forbidden VLANs for an
interface
Sets a port priority for incoming untagged
frames
C L
OMMAND INE
(Continued)
I
NTERFACE
Mode Page
IC 4-239
IC 4-255
4-233