Exec Commands; Table 4-1 Command Modes - SMC Networks SMC TigerStack III SMC6824M Management Manual

mode. You can always enter a question mark "?" at the prompt to display a
list of the commands available for the current mode. The command classes
and associated modes are displayed in the following table:
Class
Exec
Configuration
* You must be in Privileged Exec mode to access the Global configuration mode.
You must be in Global Configuration mode to access any of the other configuration modes.

Exec Commands

When you open a new console session on the switch with the user name and
password "guest," the system enters the Normal Exec command mode (or
guest mode), displaying the "Console>" command prompt. Only a limited
number of the commands are available in this mode. You can access all
commands only from the Privileged Exec command mode (or administrator
mode). To access Privilege Exec mode, open a new console session with the
user name and password "admin." The system will now display the
"Console#" command prompt. You can also enter Privileged Exec mode
from within Normal Exec mode, by entering the enable command, followed
by the privileged level password "super" (page 4-25).
To enter Privileged Exec mode, enter the following commands and
passwords:
Username: admin
Password: [system login password]
CLI session with the SMC6824M is opened.
To end the CLI session, enter [Exit].
Console#

Table 4-1 Command Modes

Mode
Normal
Privileged
*
Global
C
OMMAND
Access Control List
Interface
Line
VLAN Database
L I
INE NTERFACE
4-7