Table 4-35 Access Control List Commands - SMC Networks SMC TigerStack III SMC6824M Management Manual

802.1X is enabled on port 26
reauth-enabled:
reauth-period:
quiet-period:
tx-period:
supplicant-timeout:
server-timeout:
reauth-max:
max-req:
Status
Operation mode
Max count
Port-control
Supplicant
Current Identifier
Authenticator State Machine
State
Reauth Count
Backend State Machine
State
Request Count
Identifier(Server)
Reauthentication State Machine
State
Console#
Access Control List Commands
Access Control Lists (ACL) provide packet filtering for IP frames (based on
address, protocol, Layer 4 protocol port number or TCP control code) or any
frames (based on MAC address or Ethernet type). To filter packets, first
create an access list, add the required rules, specify a mask to modify the
precedence in which the rules are checked, and then bind the list to a specific
port.
Access Control Lists
An ACL is a sequential list of permit or deny conditions that apply to IP
addresses, MAC addresses, or other more specific criteria. This switch tests
ingress or egress packets against the conditions in an ACL one by one. A
packet will be accepted as soon as it matches a permit rule, or dropped as
Enable
3600
60
30
30
10
2
2
Authorized
Multi-Host
5
Auto
00-e0-29-94-34-65
3
Authenticated
0
Idle
0
2
Initialize
C L
OMMAND INE
I
NTERFACE
4-119