Show Logging Sendmail; Time Commands; Table 4-22 Time Commands - SMC Networks SMC TigerStack III SMC6824M Management Manual

S M
YSTEM ANAGEMENT
Example
Console(config)#logging sendmail
Console(config)#

show logging sendmail

This command displays the settings for the SMTP event handler.
Command Mode
Normal Exec, Privileged Exec
Example
Console#show logging sendmail
SMTP servers
-----------------------------------------------
192.168.1.19
SMTP minimum severity level: 7
SMTP destination email addresses
-----------------------------------------------
ted@this-company.com
SMTP source email address: bill@this-company.com
SMTP status: Enabled
Console#

Time Commands

The system clock can be dynamically set by polling a set of specified time
servers (NTP or SNTP). Maintaining an accurate time on the switch enables
the system log to record meaningful dates and times for event entries. If the
clock is not set, the switch will only record the time from the factory default
set at the last bootup.
Command
sntp client
sntp server
sntp poll
show sntp
4-68
C
OMMANDS

Table 4-22 Time Commands

Function
Accepts time from specified time servers
Specifies one or more time servers
Sets the interval at which the client polls for time GC
Shows current SNTP configuration settings
Mode Page
GC 4-69
GC 4-70
4-71
NE, 4-72
PE