Figure 3-9 Setting The Startup Code; Figure 3-10 Deleting Files - SMC Networks SMC TigerStack III SMC6824M Management Manual

B C
ASIC ONFIGURATION
If you download to a new destination file, go to the File, Set Start-Up
menu, mark the operation code file used at startup, and click Apply. To
start the new firmware, reboot the system via the System/Reset menu.

Figure 3-9 Setting the Startup Code

To delete a file, select System, File, Delete. Select the file name from the
given list by checking the tick box and then click Apply. Note that the file
currently designated as the startup code cannot be deleted.

Figure 3-10 Deleting Files

3-25