Show Running-Config - SMC Networks SMC TigerStack III SMC6824M Management Manual

Related Commands

show running-config (4-77)

show running-config
This command displays the configuration information currently in use.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
• Use this command in conjunction with the show startup-config
command to compare the information in running memory to the
information stored in non-volatile memory.
• This command displays settings for key command modes. Each mode
group is separated by "!" symbols, and includes the configuration mode
command, and corresponding commands. This command displays the
following information:
- IP address or address mode
- MAC address for each switch in the stack
- SNTP server settings
- SNMP community strings
- Event logging configuration
- Users (names, access levels, and encrypted passwords)
- VLAN database (VLAN ID, name and state)
- Spanning tree settings
- VLAN configuration settings for each interface
- Layer 4 precedence settings
- Any configured settings for the console port and Telnet
C L
OMMAND INE
I
NTERFACE
4-77