Displaying Log Messages; Figure 3-17 Displaying Logs - SMC Networks SMC TigerStack III SMC6824M Management Manual

CLI – Enter the syslog server host IP address, choose the facility type and
set the minimum level of messages to be logged.
Console(config)#logging host 192.168.1.7
Console(config)#logging facility 23
Console(config)#logging trap 4
Console(config)#
Console#show logging trap
Syslog logging:
REMOTELOG status:
REMOTELOG facility type:
REMOTELOG level type:
REMOTELOG server IP address: 192.168.1.7
REMOTELOG server IP address: 0.0.0.0
REMOTELOG server IP address: 0.0.0.0
REMOTELOG server IP address: 0.0.0.0
REMOTELOG server IP address: 0.0.0.0
Console#

Displaying Log Messages

Use the Logs page to scroll through the logged system and event messages.
The switch can store up to 2048 log entries in temporary random access
memory (RAM; i.e., memory flushed on power reset) and up to 4096
entries in permanent flash memory.
Web – Click System, Log, Logs.
Enabled
Enabled
local use 7
Warning conditions

Figure 3-17 Displaying Logs

B C
ASIC ONFIGURATION
4-59
4-59
4-60
4-61
3-39