Configuring Vlan Interfaces; Table 4-59 Configuring Vlan Interfaces - SMC Networks SMC TigerStack III SMC6824M Management Manual

VLAN C
OMMANDS
Command Mode
VLAN Database Configuration
Command Usage
• no vlan vlan-id deletes the VLAN.
• no vlan vlan-id name removes the VLAN name.
• no vlan vlan-id state returns the VLAN to the default state (i.e., active).
• You can configure up to 255 VLANs on the switch.
Example
The following example adds a VLAN, using VLAN ID 105 and name RD5.
The VLAN is activated by default.
Console(config)#vlan database
Console(config-vlan)#vlan 105 name RD5 media ethernet
Console(config-vlan)#
Related Commands
show vlan (4-240)

Configuring VLAN Interfaces

Command
interface vlan
switchport mode
switchport
acceptable-frame-types
switchport
ingress-filtering
switchport native vlan
switchport allowed vlan Configures the VLANs associated with an
switchport gvrp
4-232

Table 4-59 Configuring VLAN Interfaces

Function
Enters interface configuration mode for a
specified VLAN
Configures VLAN membership mode for an
interface
Configures frame types to be accepted by an
interface
Enables ingress filtering on an interface
Configures the PVID (native VLAN) of an
interface
interface
Enables GVRP for an interface
Mode Page
IC 4-233
IC 4-234
IC 4-235
IC 4-236
IC 4-237
IC 4-238
IC 4-250