Switch Power Status - SMC Networks SMC TigerStack III SMC6824M Management Manual

C
ONFIGURING THE
the power required by a device exceeds the power budget of the port or the
whole switch, power is not supplied.
Ports can be set to one of three power priority levels, critical, high, or low.
To control the power supply within the switch's budget, ports set at critical
or high priority have power enabled in preference to those ports set at low
priority. For example, when a device is connected to a port set to critical
priority, the switch supplies the required power, if necessary by dropping
power to ports set for a lower priority. If power is dropped to some
low-priority ports and later the power demands on the switch fall back
within its budget, the dropped power is automatically restored.

Switch Power Status

Displays the Power over Ethernet parameters for the switch.
Command Attributes
• Maximum Available Power – The configured power budget for the
switch.
• System Operation Status – The PoE power service provided to the
switch ports.
• Mainpower Consumption – The amount of power being consumed by
PoE devices connected to the switch.
• Thermal Temperature
• Software Version – The version of software running on the PoE
controller subsystem in the switch.
6. This parameter is not supported for the current hardware.
3-146
S
WITCH
6
– The internal temperature of the switch.