Snmp-Server Group - SMC Networks SMC TigerStack III SMC6824M Management Manual

SNMP C
OMMANDS
Table 4-43 show snmp view - display description
Field
View Type
Storage Type
Row Status

snmp-server group

This command adds an SNMP group, mapping SNMP users to SNMP views.
Use the no form to remove an SNMP group.
Syntax
snmp-server group groupname {v1 | v2c | v3 {auth | noauth | priv}}
[read readview] [write writeview] [notify notifyview]
no snmp-server group groupname
• groupname - Name of an SNMP group. (Range: 1-32 characters)
• v1 | v2c | v3 - Use SNMP version 1, 2c or 3.
- auth | noauth | priv - This group uses SNMPv3 with
authentication, no authentication, or with authentication and privacy.
See "Simple Network Management Protocol" on page 3-36 for
further information about these authentication and encryption
options.
• readview - Defines the view for read access. (1-64 characters)
• writeview - Defines the view for write access. (1-64 characters)
• notifyview - Defines the view for notifications. (1-64 characters)
Default Setting
• Default groups: public
• readview - Every object belonging to the Internet OID space (1.3.6.1).
• writeview - Nothing is defined.
• notifyview - Nothing is defined.
Command Mode
Global Configuration
27. No view is defined.
28. Maps to the defaultview.
4-164
Description
Indicates if the view is included or excluded.
The storage type for this entry.
The row status of this entry.
27
(read only), private
(Continued)
28
(read/write)