Spanning-Tree Spanning-Disabled - SMC Networks SMC TigerStack III SMC6824M Management Manual

Default Setting
20
Command Mode
MST Configuration
Command Usage
An MSTI region is treated as a single node by the STP and RSTP
protocols. Therefore, the message age for BPDUs inside an MSTI region
is never changed. However, each spanning tree instance within a region,
and the internal spanning tree (IST) that connects these instances use a
hop count to specify the maximum number of bridges that will propagate
a BPDU. Each bridge decrements the hop count by one before passing
on the BPDU. When the hop count reaches zero, the message is dropped.
Example
Console(config-mstp)#max-hops 30
Console(config-mstp)#

spanning-tree spanning-disabled

This command disables the Spanning Tree Algorithm for the specified
interface. Use the no form to reenable the Spanning Tree Algorithm for the
specified interface.
Syntax
[no] spanning-tree spanning-disabled
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Example
This example disables the Spanning Tree Algorithm for port 5.
Console(config)#interface ethernet 1/5
Console(config-if)#spanning-tree spanning-disabled
Console(config-if)#
C L
OMMAND INE
I
NTERFACE
4-219