Configuration Commands - SMC Networks SMC TigerStack III SMC6824M Management Manual

E C
NTERING OMMANDS
Username: guest
Password: [system login password]
CLI session with the SMC6824M is opened.
To end the CLI session, enter [Exit].
Console#enable
Password: [privileged level password if so configured]
Console#

Configuration Commands

Configuration commands are privileged level commands used to modify
switch settings. These commands modify the running configuration only and
are not saved when the switch is rebooted. To store the running
configuration in nonvolatile storage, use the copy running-config
startup-config command.
The configuration commands are organized into different modes:
• Global Configuration - These commands modify the system level
configuration, and include commands such as hostname and snmp-server
community.
• Access Control List Configuration - These commands are used for packet
filtering.
• Interface Configuration - These commands modify the port configuration
such as speed-duplex and negotiation.
• Line Configuration - These commands modify the console port and Telnet
configuration, and include commands such as parity and databits.
• VLAN Configuration - Includes the command to create VLAN groups.
To enter the Global Configuration mode, enter the command configure in
Privileged Exec mode. The system prompt will change to
"Console(config)#" which gives you access privilege to all Global
Configuration commands.
Console#configure
Console(config)#
4-8