Main Menu
15. Loosen the idler pulley center nut and adjusting nut,
then remove the air conditioning (A/C) compressor
belt.
ADJUSTING
NUT
16. Remove the crankshaft pulley (see page 6-12).
17. Remove the rubber seal from the adjusting bolt,
then remove the middle covers and lower cover.
LOWER COVER
RUBBER SEAL
Table of Contents
A/C COMPRESSOR
BELT
MIDDLE COVER
COLLAR
IDLER PULLEY
ASSEMBLY
18. Loosen the adjusting bolt 180° turn. Push the ten-
sioner to remove tension from the timing belt, then
retighten the adjusting bolt.
19. Remove the timing belt from the pulleys.
ADJUSTING BOLT
Do not remove. When
adjusting, loosen
it 180°.