Switches - Xilinx VC707 User Manual

Table 1-26: GPIO Connections to FPGA U1 (Cont'd)
FPGA (U1) Pin

Switches

[Figure
The VC707 board Evaluation Board includes a power and a configuration switch:
•
•
Power On/Off Slide Switch SW12
[Figure
The VC707 board power switch is SW12. Sliding the switch actuator from the Off to On
position applies 12V power from J18, a 6-pin mini-fit connector. Green LED DS16
illuminates when the VC707 board power is on. See
onboard power system.
VC707 Evaluation Board
UG885 (v1.2) February 1, 2013
Schematic Net Name
AW40 GPIO_SW_W
AV39 GPIO_SW_C
8-Pole DIP Switch
AV30 GPIO_DIP_SW0
AY33 GPIO_DIP_SW1
BA31 GPIO_DIP_SW2
BA32 GPIO_DIP_SW3
AW30 GPIO_DIP_SW4
AY30 GPIO_DIP_SW5
BA30 GPIO_DIP_SW6
BB31 GPIO_DIP_SW7
User Rotary Switch
AT31 ROTARY_INCB
AW31 ROTARY_PUSH
AR33 ROTARY_INCA
User SMA
AN31 USER_SMA_GPIO_P
AP31 USER_SMA_GPIO_N
1-2, callout 27 - 28]
Power On/Off Slide Switch SW12 (callout 27)
FPGA_PROG_B SW9, active-Low (callout 28)
1-2, callout 27]
Caution!
Do NOT plug a PC ATX power supply 6-pin connector into J18 on the VC707 board.
The ATX 6-pin connector has a different pinout than J18. Connecting an ATX 6-pin connector into
J18 will damage the VC707 board and void the board warranty.
www.xilinx.com
Feature Descriptions
GPIO Pin
SW7.3
SW6.3
SW2.16
SW2.15
SW2.14
SW2.13
SW2.12
SW2.11
SW2.10
SW2.9
SW10.6
SW10.5
SW10.1
J33.1
J34.1
Power Management for details on the
51