Host Computer Options; Change Time; Change The Date Format; Change Date - HORIBA ABX Micros 60 User Manual

5.1. Change Time

Changing time
Main Menu
5- Setup
4- Date and Time
1- Chg. Time
Enter the Hours (set for 24 hr.) then press the Decimal ( . ) key.
Now enter the Minutes.
Press the «Enter» key to save.

5.2. Change the Date Format

This sub-menu will allow the operator to change to format of the date according the Country's spec-
ifications.
Changing date format
Main Menu
5- Setup
4- Date and Time
2- Date Format
Select one of the 4 formats below
1- Month, Day, Year (MM-DD-YY)
2- Day, Month, Year (DD-MM-YY)
3- Year, Month, Day (YY-MM-DD)
4- Year, Day, Month (YY-DD-MM)
Press the «Enter» key to accept that specific date format.

5.3. Change Date

This sub-menu allows the operator to change the actual date once the correct format has been se-
lected.
Changing date
Main Menu
5- Setup
4- Date and Time
3- Chg. Date
Enter the first 2 numbers then press the Decimal (.) key.
Enter the second 2 numbers then press the decimal (.) key again.
Now enter the last 2 numbers and press the «Enter» key to save the new date
Press the «Esc» key to exit the Date Time Menu.

6. Host Computer Options

The ABX Micros 60
interface connection, on the back panel of the analyzer.
is capable of transmitting data to an external computer via the RS-232
ABX Micros

Host Computer Options

60 - User Manual - RAB042FEN - 15
Setup