Table of Contents
Advertisement
Tab.5-2: System units
Parameters
3
µm
MPV
LYM %
%
LYM #
#
MON %
%
MON #
#
GRA %
%
GRA #
#
2.4. Printer Selection
This sub-menu allows the selection of the printer to be used along with the
4 basic different model types of printers specifically designed to operate with the
60
analyzer.
Selecting printer
Main menu
5- Setup
1- Results
4- Printer
Use «Up» or «Down» arrow key, to choose one of the 5 printer as follows:
1- Reserved 1, for Epson LX series printers
2- Reserved 2, for Star printers
3- Reserved 3, for Seiko Thermal printers
4- Standard, for Citizen Dot Matrix printers
5- None, for Use with External Computers
Press the «Enter» key to confirm
The «5- None» printer selection is used for an External Computer that is specifically
use as an Extended Q.C. Package or/and L.I.S. connection. This selection is also used if
a printer is not going to be used in conjunction with the ABX Micros
Once the Printer type has been selected, verify that a result will print from your selection: proceed
as described in
"2.1. Reprint Results , page
Now verify that the last result ran will transmit to the printer and printout from the printer selection
previously made.
2.5. Temperature Printout
This sub-menu allows the operator to have visual confirmation of the diluent temperature displayed
on the results printout.
The operating temperature of the Diluent during analysis must remain between
the specified limits (18
peratures outside these limits are questionable and may not be valid.
Standard
SI
fl
%
#
%
#
%
#
3".
C - 32
C) or (65
F to 85
O
O
O
ABX Micros
International 1
International 2
fl
fl
%
%
#
#
%
%
#
#
%
%
#
#
ABX Micros
ABX Micros
60
analyzer.
F). Results obtained in tem-
O
60
- User Manual - RAB042FEN - 5
Setup
Results Options
60.
Advertisement
Chapters
Table of Contents
Troubleshooting
