Abx Micros - HORIBA ABX Micros 60 User Manual

8. Installation
An HORIBA ABX representative will install your instrument, software, and printer.
8.1. Package contents
A thorough inspection is carried out on the
ertheless, recommend checking the total system as soon as it is received to report any anomalies to
the carrier.
Verify that all of the parts from the package list are present:

ABX Micros

60
The
◆
Instrument
◆
Printer
◆
User manual CDROM: RAX056A
◆
Reagents, controls & calibrators CD ROM: RAX055A
◆
Daily guide : RAB180
◆
Power cable (european) : DAC011A or power cable (US) : DAC012A
◆
Installation kit (Bottle or Pack)
8.1.1. «Bottle» Installation kit
ABX Micros 60
The
Tab. 2: Bottle installation kit
DESIGNATION
Reagent straw L=270 mm
Sampling needle
Diluent/Waste male connector
Cristal tube 3x6
O' ring 6x1.5
O' ring 1.4x1.25
Rubber stopper 2 holes
Reagent bottle stopper
Common installation kit
8.1.2. «Pack» installation kit
ABX Micros 60
The
Tab. 3: Pack installation kit
DESIGNATION
Sampling needle MICROS 60-CT
O' ring 6x1.5
O'ring 0.74x1.02
Common installation kit
ABX Micros
-OS/OT boxes contain the following parts :
-OT «bottle» installation kit (XEA 314 B) includes :
PART NUMBER
XEA017A
GBC069AS
EAC019A
EAE011A
FAA036A
FAA0053A
FBL001A
XDA566A
XEA312B
-OT «pack» installation kit (XEA 332 B) includes :
PART NUMBER
GBC069AS
FAA036A
FAA053A
XEA312B
ABX Micros
Introduction
60
before sending it. We, nev-
QTY
3
1
2
4
1
2
1
2
1
QTY
1
2
2
1
60 - User Manual - RAB042FEN - 13
Installation