End Of The Day Rinsing - HORIBA ABX Micros 60 User Manual

ABX Micros

4.5. End of the day rinsing

It is necessary to run a Standby/Shutdown cycle at the end of each day.
Shutdown cycle
Press the «Standby» key on the front panel
The ABX Micros
and puts the system into a Standby mode.
The ABX Micros
Standby mode until the next working day. It also may be left in the Standby mode between long
breaks during the day.
When the ABX Micros
a «STARTUP» cycle before returning to any analysis cycles
8 - RAB042FEN - User Manual -
60
60 performs a complete cleaning with the enzymatic detergent (Miniclean)
60 can then be switched «OFF» at the end of the working day or left in this
60 is left in the standby mode, it is mandatory to perform
ABX Micros 60