Units - HORIBA ABX Micros 60 User Manual

ABX Micros
The last results in memory will automatically printout with the following information:
◆Date and Time,
◆the associated Identification,
◆Sample run and Sequence Number,
◆Possible flags if any,
◆the Histograms (if selected in the setup).
2.2. Printout
This function will disable/enable the printout of the WBC, RBC, and PLT Histograms.
Selecting histograms for printout
Main menu
5- Setup
1- Results
2- Printout
Use «Up» or «Down» arrow key, to select one of the 3 options as follows:
Press the «Enter» key to confirm.

2.3. Units

This sub-menu allows the operator to select between 4 different Units of Measurement. These units
vary from country to country and are designed for international applications.
Choosing system units
Main menu
5- Setup
1- Results
3- Units
Use «Up» or «Down» arrow key, to choose one of the 4 system units as follows:
Press the «Enter» key to confirm
Available units are detailed in
.
Tab.5-2: System units
Parameters
WBC
RBC
HGB
HCT
PLT
MCV
MCH
MCHC
4 - RAB042FEN - User Manual -
60
1- results printed out with histograms
2- results printed out without histograms
3- results printed out without RBC histogram
1- Standard
2- SI
3- International 1
4- International 2
"Tab.5-2: System units, page 4"
Standard SI
3 3 9
10 / mm 10 /L
6 3 12
10 / mm 10 /L
g/dl mmol/L
% I/L
3 3 9
10 / mm 10 /L
3
µm
fl
pg fmol
g/dl mmol/L
ABX Micros 60
International 1 International 2
3 3 9
10 / mm 10 /L
6 3 12
10 / mm 10 /L
g/dl g/L
% I/L
3 3 9
10 / mm 10 /L
fl fl
pg pg
g/dl g/L