Graphs (Only With Q.c. Smart Card) - HORIBA ABX Micros 60 User Manual

Maintain a copy of these results each month for Quality Control Analysis verification.
NORMAL
LOT#: M211
EXP DATE :02/20/06
No DATE TIME OP
1 01/03/06 09:57 OP. 2
2 01/04/06 08:23 OP. 1
3 01/05/06 10:57 OP. 3
-- --------- ------ ------
-- --------- ------ ------
ETC.....
REFERENCE:
WBC RBC HGB
MEAN 7.4 4.52 13.4
LOW 6.8 4.34 12.8
HIGH 8.0 4.70 14.0
ACTUAL:
WBC RBC HGB
MEAN 7.4 4.54 13.3
SD 0.13 0.06 0.16
CV 1.70 1.37 1.18
ETC...
Fig.4-2: QC Statistics printout
1.6. Q.C. Graphs (Only with Q.C. smart card)
ABX Micros 60
The
files stored on the Q.C. Smart card. Each Levey-Jennings chart will plot 1 data point per parameter,
per control run, for every control data point stored.
Printing Graphs:
Selecting Graphs
Main Menu
2- QC
5- Graphs. Press «Enter» key
Use the «Up» & «Down» arrow key to select one of the 3 levels
Or select «ALL» to select the 3 Levels
Press «Enter» key to printout the Graphs
The parameter charts are determined by the internal software setup. See Section 1,
page 1-3 for the parameters that are printed out on the Levey-Jennings charts.
Q.C.
WBC RBC HGB HCT
7.4 4.58 13.6 36.3
7.3 4.52 13.2 35.3
7.3 4.47 13.4 35.2
---- ----- ----- -----
---- ----- ----- -----
HCT MCV MCH MCHC PLT
35.7 79 29.6 37.5
33.7 75 27.6 34.5
37.7 83 31.6 40.5
HCT MCV MCH MCHC PLT
35.5 78 29.4 37.5
0.59 0.63 0.43 0.53
1.67 0.80 1.46 1.40
plots Levey-Jennings charts for each parameter of the Quality Control
ABX Micros
Quality Assurance
Quality Control
TIME: 07:31
DATE: 03/01/06
MCV MCH MCHC PLT
79 29.7 37.5 279
78 29.2 37.4 247
79 29.9 38.0 254
---- ----- ----- -----
---- ----- ----- -----
249
219
279
252
11.22
4.45
1.1. Parameters,
60 - User Manual - RAB042FEN - 9