Reagent Connections; Bottle Connections; Alphalyse 360 - HORIBA ABX Micros 60 User Manual

ABX Micros
Please also refer to the W.H.O (World Health Organization) guidelines: «Labo-
ratory Biosafety Manual, 2nd edition», for further information.

1.2. Reagent connections

1.2.1. Bottle connections

Lyse and cleaning reagents are placed inside the reagent compartment (see
bottles, page
Install the reagent straws and the bottle stoppers.
Connect the blue tube to the MINICLEAN bottle and the white tube to the LYSE bottle.
Close the compartment cover.
Fig.6-1: Reagent bottles
1 - When the ABX Micros
mandatory to use specific LYSE LMG and MINIDIL LMG reagents.
2 - The Diluent container will be located on the bench at the same level than the instru-
ment.

1.2.2. Alphalyse 360

Open the pack pulling the flap A and open the level window B (see
4 - RAB042FEN - User Manual -
60
4").
60
ABX Micros
is set up with the 16 or 18 parameters mode, it is
"Fig.6-2: Opening, page
60
"Fig.6-1: Reagent
5").