Results Options; Reprint Results - HORIBA ABX Micros 60 User Manual

Tab.5-1: Menu\Setup overview
4- Date Time 1- Chg time
2- Date format
3- Chg date
5- Host options 1- Host comm.
2- Baud rate
3- Transmission
6- Barcode Checksum y/n
7- Memo card Memo card off
Memo card on

2. Results Options

This sub-menu will allow the operator to access and edit some of the following sub-menu functions,
such as:
◆Reprint the result of the last sample in the system Memory
◆To select the Histograms to printed out
◆To select the Unit of Measurement type
◆To select the type of printer
◆To select the Temperature to be printed out
◆To select the Patient Parameter limits to be printed out
◆To select the LMG's (Lymphocytes, Monocytes, and Granulocytes) to be printed out (Available
only for ABX Micros 60-0S/0T16
sults , page 6"

2.1. Reprint Results

Reprinting last results
Main menu
5- Setup
1- Results
1- Reprint results
The ABX Micros
usually the very last sample analyzed, either a patient sample or a quality control level
blood only. A calibrator blood result is stored in an entirely different system format.
1- Format Argos
2- Format R&D
3- Format ABX
4- TR off
1- 300
2- 1200
3- 2400
4- 4800
5- 9600
1- Memo
2- transmission
3- Print list
4- Reprint one
5- Reprint all
6- Print from-to
7- Clear card
("2.2. Printout , page
("2.3. Units, page
("2.4. Printer Selection , page
("2.5. Temperature Printout , page
or 0S/0T18 parameter
60 will only hold 1 result in the system memory. This result is
ABX Micros
1- Printer
2- Host Comp.
1- Begin
2- End
3- Reprint results
("2.1. Reprint Results , page
4")
4")
5")
5")
("2.6. Print Limits , page 6")
analyzers)"2.7. Print LMG Re-
60 - User Manual - RAB042FEN - 3
Setup

Results Options

3")