Table of Contents
Advertisement
ABX Micros
5.1.4. Results Printout
5.1.4.1. US Mode
RESULTS
DATE : 01/20/2006
ID : SMITH_1234567
SEQ. # : 27
STARTUP PASSED
Plt Flags :
3
WBC : 10.0 10
6
RBC : 4.90 10
HGB : 15.0 g/dl
HCT : 43.9 %
Fig.3-1: US mode printout
Printed information is as follows:
1-
The «Date» the sample was analyzed
2-
The «Time» the sample was analyzed
3-
The Sample «Identification» that the Operator had entered either (Manually or Barcode).
4-
The «Sequence» number of the sample run
5-
The Instrument «STARTUP» status.
6-
The «PLT flags» if any were reported
7-
The 8 Parameter CBC results with Limit flags and units.
The sequence number is updated to the number «1» each calendar day. the number in-
creases by increments of 1 each analysis cycle sequentially. this sequential number can
not be modified by the operator.
10 - RAB042FEN - User Manual -
60
TIME : 09:25
3
/ mm
3
/ mm
ABX Micros
3
MCV :90 µm
MCH : 30.6 Pg
MCHC : 34.1 g/dl
3
3
PLT : 287 10
/mm
60
Advertisement
Chapters
Table of Contents
Troubleshooting
