Running Patient Samples; Transmission Of Results; Print List - HORIBA ABX Micros 60 User Manual

ABX Micros
make sure that the Memo card sub-menu is selected for 2 - MEMO-OFF.
2- If the STANDARD ID Mode (see
page
ID mode will automatically change to US mode

8.2. Running Patient Samples

1- Place the sample beneath the sample probe and press the manual sample bar to start the cycle
(or press the «Start» key to start the cycle).
Entering sample identification
Enter the sample identification (Up to 13 Alphanumeric characters).
Use the «Number» keys to enter the numbers directly.
Use the «Up» and «Down» arrow keys to select each alpha character
Press the «Enter» key after each alphabetical selection.
Then the analyzer checks to see if there is a memory card present in the card reader.
If the memory card has not been inserted, a message will appear on the display as indicated: Insert
the memory card and press the Enter key.
If a wrong card is inserted instead of a memory card, a message will appear on the display as indi-
cated: Remove the card, insert a memord card and press the Enter key.
If the operator inserts the memory card in the wrong way, a message will appear on the display as
indicated: Remove the memory card, place the chip in the Up position and forward to the point of
insertion. Insert the card and press the Enter key.
If the memory card is full, insert a new memory card, and press the «Enter» key or print out all the
results of the full card, clear these results from the card, and re-insert the memory card, then press
the «Enter» key.
The Memory card can store up to 60 results. When the card is «Full», it is highly sug-
gested to print out «All» the stored results from the card before using a new card or
clearing the full card.

8.3. Transmission of Results

This sub-menu allows the operator to select as to where they want the results from the memory card
to be transmitted to. Printer or External computer? The Memo functions for both printer and external
computer include:
◆Print list of sample ID's to Printer or Computer
◆Print one result to Printer or Computer
◆Print all results to Printer or Computer
◆Print specific numbers of sample results to Printer or Computer.
18 - RAB042FEN - User Manual -
60
"4.7. Choosing sample identification mode ,
14") was previously selected before turning the memo card function «On», the
ABX Micros
"8.4. Print List , page 19"
60